carpet water damage Melbourne

Carpet Water Damage: The Top Reasons Your Carpet Floors Are Wet

If you recently experienced carpet water damage Melbourne to your home, the last thing you want is for it to happen again. But what can you do?

The best way to ensure that this doesn’t happen again is by preventing water from leaking into your home in the first place.

If your carpet tiles are looking a little worse for wear, there could be an underlying issue that needs to be addressed—including things like plumbing leaks or cracks in walls and ceilings.

Pipes bursting

If you have carpet water damage Melbourne in your house, the first thing to do is look for one of these four things:

  • A broken pipe. Pipes can burst for a number of reasons, but usually, it’s because they are old and weak or damaged by nearby construction work. The pipe might be hidden under carpeting or even in an attic or basement — so check everywhere.
  • A leaky faucet or toilet tank lid. Broken pipes can lead to leaks from the faucets themselves, too; if there’s water coming out from under your sink, you should probably call a plumber right away before it becomes a bigger problem.

A flooded basement. If your basement has been flooded, it’s a good idea to check all the other areas of your house for leaks as well — just in case there was another problem that caused it.

A water meter reading that seems high for no reason. You can also tell if there’s an issue with your plumbing by checking your water meter; if you notice that it’s running much faster than usual, then you may have a leak somewhere in your home.

Hot water heater leaking

If a hot water heater is leaking, it can be a major issue for your home and the carpeting. The hot water heater is a large metal tank that heats water for use in homes. If these tanks are damaged, they can leak and cause significant damage to the flooring of your home, as well as being a health hazard because of mould that grows in wet areas.

If you suspect that there is a leak in your hot water heating system, first check the temperature setting on your thermostat to make sure that it hasn’t been accidentally bumped up too high. If this isn’t causing the problem, then take off any coverings over the tank and look inside for signs of leakage, such as puddles or discolouration around its base.

Toilet tank leaking

The next most common cause of water damage to the carpet is a leaky toilet tank. Here are some things you should check if you think the problem is a leaking or cracked tank:

  • Check for leaks around the base of your toilet by looking for stains on your floor. If you notice any, it could be indicative of an internal leak.
  • If your toilet has an exposed supply valve (on top), try tightening it and see if that helps stop the flow of water from your tank into the bowl. If not, replace it with a new one.

Roof leak

The most common reason for carpet water damage is roof leaks. In the first place, you can prevent a roof leak by having your roof inspected and repaired if there are any problems with it. You can spot a potential problem by noticing some signs:

  • Leaking or discolouration on the ceiling
  • Sagging walls or ceilings
  • Water stains on ceilings or walls, especially above windows


If you have carpet water damage Melbourne, it can be due to many different things. The best thing you can do is inspect the problem and try to find out what has caused your carpet floors to get wet so quickly.

You should also check if there are any leaks coming from your pipes or appliances that may have caused the water damage. The best approach to prevent further damage to your commercial property is to contact Total Flood Damage Melbourne straight away. In order to prevent you from losing critical time or money, our short response time and qualified specialists will swiftly get your property up and running again.