5 Ways To Prevent Damaging Your Carpet When It Gets Wet
When you spill something on your carpet, it can be tempting to immediately grab a towel or rag and rub it dry.
However, this approach doesn’t allow the carpet fibres time to release any moisture they’ve absorbed, meaning they can get soggy and damaged over time.
Instead of taking this risk, follow these five steps to prevent damaging your wet carpet cleaning in Melbourne when you need to clean up an accident.
1) Absorb the water with towels
After you’ve gotten rid of any excess moisture, it’s time to put down some protection for your wet carpet.
If you can, get to your wet carpet cleaning in Melbourne as soon as possible and start drying them immediately. If possible, have a few clean and dry towels on hand so you can quickly sop up excess water before it’s absorbed into carpet fibres.
The longer water sits on a carpet, the greater its potential to cause damage. Once all visible water is removed, proceed to step two.
Place waterproof protectors under rugs or runners until they are completely dried out—this will prevent stains from setting in and keep moisture away from other areas of your home that could be damaged by dampness.
2) Vacuum
The first thing you should do when your carpet gets wet is clean up any excess water and remove it from your carpet.
The easiest way to do that is with a powerful vacuum cleaner. Get as much extra water as possible because it can cause lasting damage if left for too long.
Here’s how: Turn on your vacuum and pass it over affected areas until no more visible moisture remains. Continue cleaning small sections at a time until all of your carpets have been thoroughly vacuumed.
3) Reduce dampness with baking soda
Try a dehumidifier: A dehumidifier is one of the best ways to remove excess water from your house and carpets.
Baking soda can absorb a lot of moisture from your carpet. Sprinkle some on top of your carpet and leave it overnight.
After that, vacuum up all you’ve put down and replace it with fresh baking soda. Repeat several times until no more moisture is detected.
4) Use fans to speed up drying time
If you have fans at home, turn them on and point them towards your wet carpet. Fans help circulate air and speed up drying time, but only if there’s an opening for air to pass through.
Close all windows, doors, and AC vents where the air isn’t passing through to ensure your carpet dries quickly.
Be careful not to place a fan directly on your carpet—this can damage it by forcing water deeper into its fibres. Instead, put a fan several feet away from your wet carpet so that it blows air onto it rather than moving water down into it.
5) Get your carpet steam cleaned
Getting your carpet steam cleaned is one of the easiest ways to prevent damaging your carpet when it gets wet.
Regular cleaning of your carpet ensures that any stains, spots or other concerns are addressed immediately. Get yours done today!
Another way to clean your carpet quickly is with a portable deep cleaner. This small appliance can help you deep clean hard-to-reach areas, so you don’t have to rent out a big machine for small jobs.
Conclusion
If you find yourself in a situation where your carpet gets wet, it’s important to dry it as soon as possible. As always, prevention is key.
Ensure gutters and downspouts on your home are working properly so that water isn’t spilling over and onto your house’s foundation. Regularly check your foundation for cracks or holes where water can leak inside.
If you end up with a wet carpet, these tips can help you only to a certain level thus its better if you leave it to expert wet carpet cleaning in Melbourne.
Total Flood Damage Melbourne has the expertise to manage any issue involving flooding or water damage. Our specialised restoration staff is qualified and educated to effectively manage flood catastrophes so that you can relax knowing that you are in good hands.
