Top 5 Wet Carpet Cleaning Methods – The Best Carpet Cleaning Method
There are many wet carpet cleaning methods available. The most common is steam cleaning, which uses hot water and pressure to clean the carpet. But there are also dry and foam cleaning methods that use less water but still get the job done. And if you want to save time or money without sacrificing quality, wet carpet cleaning in Melbourne is a good option that takes only one step: rubbing your carpet with a towel!
-
Steam Cleaning
Steam cleaning uses water mixed with detergent as a solution, which is pumped through a hose and heated up to about 200 degrees Celsius. The hot steam penetrates deep into the fibres of your carpet to remove stains, dirt and odours.
Steam cleaning is effective on almost all types of carpets and can be used on wet or dry carpets. It’s also a good option for people who suffer from allergies because it leaves no residue behind once it has dried out (unlike other methods).
However, if your carpet is very dirty or there are large amounts of mud stuck in between the fibres, then steam cleaning may not be an ideal choice for you – instead, we at Total Flood Damage Melbourne recommend using either carpet shampooing or dry extraction cleaning methods.
-
Dry Cleaning
Dry cleaning is a method of carpet cleaning that uses a dry foam solution. The foam solution is applied to the carpet using a machine that applies the solution to the carpet. Dry foam can be used to clean both residential and commercial carpets.
-
Foam Cleaning
Foam cleaning is the most effective method for removing stains. It’s also the most environmentally friendly and allergy-friendly solution, making it perfect for homes with pets and children.
The chemical ingredients of foam cleaning products are mixed with warm water, which becomes a thick foam as it hits the carpet fibres. The foaming action lifts dirt from deep in your carpet and traps it in the foam’s pores to prevent re-soiling once you clean up any excess from the surface.
-
Shampooing
Shampooing is a method of cleaning carpets by applying shampoo to the carpet and then scrubbing it with a brush.
This method is good for removing stains from carpets because it can remove dirt and stains from deep down in the carpet fibres. The liquid gets into all areas of your carpet and binds to dirt, making it easy to remove with a scrubbing or vacuuming process later on.
It’s also helpful for removing pet stains from both indoor and outdoor spaces because pets are notorious for leaving messes behind that seem impossible to clean up at first glance!
-
Bonnet Cleaning
If you’re looking for the most effective method of wet carpet cleaning in Melbourne, bonnet cleaning is the way to go. It uses a special machine that sprays water and soap onto your carpet and then agitates it with a rotating bonnet (which is what the machine is called). This process loosens up dirt particles so that they can be vacuumed away.
The pros of this method are:
- It’s very thorough—bonnet cleaners use very high-powered vacuums to remove all of their suds from your carpets so that they can be as clean as possible.
- You’ll have cleaner carpets in less time than any other method out there because of how thorough it is.
- You’ll receive recommendations on how to care for your carpets after they’ve been cleaned by professional cleaners who know their stuff! This means that if there are any stains or spills left over after cleaning day, you won’t have to worry about them because professionals will have already told you how best to deal with them!
Conclusion
We hope that this list of the top five wet carpet cleaning in Melbourne has helped you to better understand the different types of methods offered. There are many benefits to each one, but you should pick which works best for your home or business. We know that it can be confusing sometimes when trying to decide what type of cleaning service will work best for your needs, but we encourage everyone who reads this article today to consider using our services here at Total Flood Damage Melbourne For You!
